JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Crystal Heat Pump *5.5Kw* - CHPXP055_Trad
 

 

 

 

 

 

 

 

Traditional on/off 5.5 KW heat pump.

Model - CHPXP055_Trad

 

C.E. Certified 

(see below)

Front View

PX 075-255 - Crystal logo.png

Rear View


PX 075-255 - Crystal logo.png

10M Signal wire,1pc

10M Signal wire,1pc.png

 

 

Drain

Water drainage pipes, 2pcs

Winter cover

Winter cover

Anti-vibration base, 4pcs

 
Fitted U.K. Mains Cable.
 
 
 

 

 

Compared to regular gas, electric and oil heaters you could save as much as 80% of your existing 

 heating bill when heating a large body of water, whether it be a pond, swimming pool or hot tub.

The COP rating (the ratio between input electricity and heating output) can be 

as high as 5.3 @ 28 degrees ambient air temperature.

With regards to ambient air temperature, the higher (warmer) 

the temperature the better the heat pump will work. 

 

These units will work down to -5 degrees Celsius ambient air temperature!

 

As always, we recommend a backup heater is necessary,

as should something go wrong with regards to pond users, 

who do not want to risk loss or stress to their fish in the depths of winter.

 

·         R32 Refrigerant gas with a third of the carbon footprint of R410A units

 

There are lots of extras included with our Heat Pumps.

1. ABS casing

 

2. WiFi

(Mobile App based, enabling switching unit on/off as long as power is on, 

parameter change, fault diagnosis, mode change, timer settings and temperature set change.)  

 

3. Drip Tray Heater

 

4. 10 metre extension cable for remote siting of LCD

 

5. Drain and tube

Although we recommend you do not use this in winter as it could block due to freezing.

Also making sure there is enough space between the underneath of the unit

and the ground so "ICE" does not back up into the unit from the ground.

 

6. Connection lead and U.K. Mains Plug fitted

 

7. Winter cover.

 

8. Rubber mounting feet.

 

 

 

U.K. WARRANTY

All "completed" Warranty Registration paperwork, Installation paperwork and 

photo`s must be returned to Crystal Enterprises Ltd as per the "T&C`s".

 

2 year parts and labour warranty for whole machine for UK mainland on "Manufacturer fault ONLY".

Click for FULL WARRANTY- Terms and Conditions

2 year Titanium heat exchanger warranty on "Manufacturer fault ONLY".

It is important to keep water balance parameters and Chlorine optimal, so as not to degrade the heat exchanger, 

as this will void the warranty.

Click for FULL WARRANTY- Terms and Conditions

2 year compressor warranty on "Manufacturer fault ONLY".

The use of the wrong size of connection cable or cable extension will void the warranty.

Click for FULL WARRANTY- Terms and Conditions

 

International Warranty: -

All "completed" Warranty Registration paperwork, Installation paperwork and

photo`s must be returned to Crystal Enterprises Ltd as per the "T&C`s".

 

The 2 year warranty, on "Manufacturer fault ONLY", covers the supply and

shipping of replacement spare parts to a UK address only.

The 2 year Heat Exchanger and Compressor warranty, on "Manufacturer fault ONLY", covers the supply and

shipping of replacement spare parts to a UK address only.

It is important to keep water balance parameters and Chlorine optimal, so as not to degrade the heat exchanger, 

as this will void the warranty.

The use of the wrong size of connection cable or cable extension will void the warranty.

If spare parts are required to be sent for a heat pump outside the UK, the parts will be

sent free of charge to a UK address only.

If parts are to be shipped outside the UK, the customer pays the international shipping cost for the parts.

For repairs requiring an engineer then customer returns the unit to Crystal Enterprises for Repair.

Customer pays "ALL" transport costs.

Click for FULL WARRANTY- Terms and Conditions

 

Please see below for a full list of spec fications on this model: -

 

To keep the pond at a 10-12 degree temperature at minus 5 degrees ambient when using this unit for a pond related purpose, the advised maximum pond volume is 1200 UK Gallons or 5.5m3 this is dependent on insulation, environmental situation and circumstances.

 

This unit is ideal for an indoor "grow on" pond of approx. 1000 to 2000 Litres or 222 to 444 UK Gallons  to attain a temperature of 18-20 degrees at minus 5 degrees ambient assuming the pond is well insulated and well covered.